Lorem quis bibendum auci Lorem gravida nibh vel velit auctor aliquet. Aenean sollicitudin, lorem quis bibendum auci elit consequat ipsutis sem nibh id elit. Duis sed odio sit amet nibh vulputate cursu. Ut enim ad minim veniam.

© 2016 Your Business Name!

Senza categoria

Design for Craft / Senza categoria (Page 4)

Wood pulp

Here in DfC we were never satisfied with filaments containing wood powder: not easy to print and to finish.
So we’ve decided to work, with our Stick Filaments, to obtain a material that can easily be printed and, then, finished with the typical tools of the wood. In this picture we’re proud to show you one of the first prints that we achieved with our new Stick Filament containing wood pulp. The result is an object of similar appearance to wood but with the resistance of the plastic! The printing process does not require special devices. The printed object can be sanded, painted and polished as with any wooden material. Finally, we use 40% of wood pulp on this filament, other suppliers use lower percentage… Nice!
We are very pleased with this result and we want to make it available soon for the purchasing in our shop.

Wood pulp

Scented filaments for 3D printing!

Here we go again, we have a wonderful new material for 3d printing. Who ever printed with ABS (which by the way has to be printed under certain conditions of security) knows the smell of the plastic during the melting process. Furthermore, the plastics do not have a good smell even after the production phase. So we thought: why not make a scented plastic? And we did it.

Ladies and gentlemen: we present the filament that smells of vanilla! Your lab will smell good during your prints and, furthermore, the smell will be maintained by the object even after you have printed it. Cool, isn’t it? The filament Vanilla, along with other varieties of Stick Filament, is on sale for pre-order at WWW.STICKFILAMENT.COM very soon. Check it out!

Stick Filaments ready to go!

We worked hard for a wonderful Stick Filament launching site and now… here it is! Stick Filament is a innovative 3d printing format for plastic filaments with many “pro”.

EASY, because you can load the filament in the 3d print simply avoiding any twisting;
COMFORTABLE, because you can have a tidy desktop;
COLORED, because you can print multicolor objects from the same extruder;
CHEAP, because you can buy small quantity of filament also with the choise of more colours;
WISE, because you can reduce as much as possible the wasting of not used filament;
TECHNOLOGICAL, because Stick filament could be produced with many different materials, difficult to find in spool;
SMART, because you can customize materials and colours on demand.

From today you can pre-order them in our new site in three different versions: Mix Pack (multicolor filaments in PLA and HIPS) and Photolum Pack (phosphorescent HIPS). The Sticks are, at the moment, available only in 3mm.

We need at least 100 pre-orders for the production start-up and then we’ll be ready to go for the shipping! 🙂

Stick Filament 3D printing detail

New materials for 3D Printing: Cellulose acetate

Our efforts to look for new materials ad hoc for 3D printing are bringing significant results through the use of Stick Filament.

Today we present the Cellulose acetate. It is an ancient material, early versions date from the second half of 800, with rich applications nowadays: eye glasses, for example. We are testing it, obviously in stick format, in order to verify its limits and potential. The first tests are very good: excellent print quality (even without hot bed), no shrinkage and warping, excellent mechanical resistance of the press. And finally, it also can be water-soluble! Not bad…

The upgrading of ourself

Design for Craft supports the National Convention of Spina Bifida organized by AMISB (October 27th, 2013 in Civitanova Marche). Spina bifida is a developmental congenital disorder caused by the incomplete closing of the embryonic neural tube. We want to send a message that we hope will be helpful to many. The increasing diffusion of technology “open” and digital fabrication can give a real contribution to the solution of some problems of the disability, but few are aware of that outside of the maker’s world.
In this site, we have shown some examples for the upgrading of everyday objects. It’s important to know that a new way of thinking and produce useful items and support to our living situations under difficult conditions is now possible thanks to the “ad personam” production of prostheses and aids with new tools, easy, cheap and friendly. Check out this video.
This can happen with our lead role in the problem solving process. Nowadays the upgrading can also relate to ourselves and our physical conditions, so we should call it “self upgrading”.

20131027-231547.jpg

It’s test time

The tests on Stick Filaments 3mm are on the go, and soon we will have ready version also for 1.75mm. The Styrene, that we’re trying for weeks with excellent results, according to the feedbacks from testers and makers that are using different FFF printer models. In general the Styrene ensures low extrusion temperatures, absence of warping and good quality of the final print (similar to that of PLA). Also remember that the Styrene, unlike the ABS, doesn’t cause harmful emissions (in the form of Ultra Fine Particels) of hydrogen cyanide.

In a short time we’ll be testing PLA Stick Filaments, but the great news for everybody are special plastics. We will be able to propose plastics not currently available on the market of the filaments for 3D printing: surely you’ll be surprised… To keep up with the latest news arrival we invite you to subscribe to our newsletter.

THAT’S ITALIAN

The Rome Maker Faire has ended today. We were part of a relevant event for our country for the first time makers present themselves to the country. 35,000 people have come to know a world that until a few days ago was unknown.

We talked until losing his voice, we met so many interesting people, but above all, people were sincerely amazed and surprised. We bring home the certainty that our country has the power, capacity and will to build a great future for us and for our children. Dale Dougherty, promoter of the Maker Faire, wrote “That’s Italian”. Thanks Dale, we are proud of it.

Rome Maker Faire

STICK FILAMENTS

Chi ha detto che il filamento può essere prodotto e commercializzato solo in rotoli?

Design for Craft presenta STICK FILAMENT, il primo filamento sperimentale progettato appositamente per la stampa 3d.
Pratico, modulare, economico e smart, è la risposta a molti degli inconvenienti comuni ai filamenti utilizzati sino ad ora dalle stampanti 3d desktop, originariamente nati per altre applicazioni.

Stick Filament è pratico perché fornito in stecche e non in spool
o bundle; questo rende più semplice l’inserimento del filamento nello stepper ed evita inceppamenti e inconvenienti dovuti a fastidiose torsioni. Inoltre, il suo formato ne rende comodo lo stoccaggio
in laboratorio.

Stick Filament è un sistema modulare con innesto a pressione che permette di fissare in modo sicuro tra loro le stecche fino a raggiungere la lunghezza desiderata. Ciò consente, inoltre, la stampa di oggetti con più colori: basta giuntare tra loro stecche di diverso colore e il gioco è fatto!

Stick Filament è economico perché, finalmente, consente di acquistare la quantità di filamento che si intende realmente utilizzare senza necessariamente comprare costosi spool da 1 kg.

Stick Filament è smart perchè consente di scegliere tra una grande varietà di plastiche dedicate alla stampa 3D: dall’ABS al Nylon, dal PVA idrosolubile allo Styrene, tutti in diversi colori e qualità personalizzabili anche su richiesta.

Stick Filament è al termine della fase di testing
e sarà disponibile per l’acquisto già dalle prossime settimane presso l’e-shop di Design for Craft.

stick filaments_pic